ASME B16.47 Add Flanges
Dimensions of Class 150 Series B Flanges
| Nominal Size |
Outside Diameter (OD) |
Min. Thickness [Note1] - WNF (tf) |
Min. Thickness [Note1] - Blind (tf) |
Length Through Hub (Y) |
Hub Dia. Base [Note2] (X) |
Hub Dia. Top (A) |
Raised Face Dia. (R) |
Drilling - Bolt Circle Dia. | Drilling - No. of Bolt Holes | Drilling - Dia. of Bolt Hole | Dia. of Bolt |
Min. Fillet Radius (r1) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 26 | 30.94 | 1.57 | 1.69 | 3.44 | 26.94 | 26.06 | 28.00 | 29.31 | 36 | 7⁄8 | 3⁄4 | 0.38 |
| 28 | 32.94 | 1.69 | 1.82 | 3.69 | 28.94 | 28.06 | 30.00 | 31.31 | 40 | 7⁄8 | 3⁄4 | 0.38 |
| 30 | 34.94 | 1.69 | 1.94 | 3.88 | 31.00 | 30.06 | 32.00 | 33.31 | 44 | 7⁄8 | 3⁄4 | 0.38 |
| 32 | 37.06 | 1.75 | 2.07 | 4.19 | 33.06 | 32.06 | 34.00 | 35.44 | 48 | 7⁄8 | 3⁄4 | 0.38 |
| 34 | 39.56 | 1.88 | 2.19 | 4.28 | 35.12 | 34.06 | 36.25 | 37.69 | 40 | 1 | 7⁄8 | 0.38 |
| 36 | 41.62 | 2.00 | 2.25 | 4.57 | 37.19 | 36.06 | 38.25 | 39.75 | 44 | 1 | 7⁄8 | 0.38 |
| 38 | 44.25 | 2.07 | 2.44 | 4.82 | 39.25 | 38.12 | 40.25 | 42.12 | 40 | 11⁄8 | 1 | 0.38 |
| 40 | 46.25 | 2.13 | 2.57 | 5.00 | 41.31 | 40.12 | 42.50 | 44.12 | 44 | 11⁄8 | 1 | 0.38 |
| 42 | 48.25 | 2.25 | 2.63 | 5.19 | 43.38 | 42.12 | 44.50 | 46.12 | 48 | 11⁄8 | 1 | 0.44 |
| 44 | 50.25 | 2.32 | 2.75 | 5.32 | 45.38 | 44.12 | 46.50 | 48.12 | 52 | 11⁄8 | 1 | 0.44 |
| 46 | 52.81 | 2.38 | 2.88 | 5.63 | 47.44 | 46.12 | 48.62 | 50.56 | 40 | 11⁄4 | 11⁄8 | 0.44 |
| 48 | 54.81 | 2.50 | 3.00 | 5.82 | 48.50 | 48.12 | 50.75 | 52.56 | 44 | 11⁄4 | 11⁄8 | 0.44 |
| 50 | 56.81 | 2.63 | 3.13 | 6.00 | 51.50 | 50.12 | 52.75 | 54.56 | 48 | 11⁄4 | 11⁄8 | 0.44 |
| 52 | 58.81 | 2.69 | 3.25 | 6.13 | 53.56 | 52.12 | 54.75 | 56.56 | 52 | 11⁄4 | 11⁄8 | 0.44 |
| 54 | 61.00 | 2.75 | 3.38 | 6.32 | 55.62 | 54.12 | 56.75 | 58.75 | 56 | 11⁄4 | 11⁄8 | 0.44 |
| 56 | 63.00 | 2.82 | 3.50 | 6.50 | 57.69 | 56.12 | 58.75 | 60.75 | 60 | 11⁄4 | 11⁄8 | 0.56 |
| 58 | 65.94 | 2.88 | 3.62 | 6.82 | 59.69 | 58.12 | 60.75 | 63.44 | 48 | 13⁄8 | 11⁄4 | 0.56 |
| 60 | 67.94 | 2.94 | 3.75 | 7.00 | 61.81 | 60.12 | 63.00 | 65.44 | 52 | 13⁄8 | 11⁄4 | 0.56 |
Notes
Dimensions are in inches.
1) The minimum flange thickness does not include the raised face thickness
2) This dimension is for the large end of hub, which may be straight or tapered.
3) WN ID/Bore is to be specified by purchaser.
4) For other details and tolerances see specification.